Emulsified Asphalt Flazcoat

This section covers the use of a mixture of aggregate, asphalt emulsion, water and polymer additives as a flexible pavement surface layer in order to maintain pavement skid resistance, seal hairline cracks, protect the pavement surface from oxidation and inhibit water penetration into the pavement layer.

Why Danoes-65? :

Because the terms of viscosity are 65% solid and 35% water.

Advantage Danoes-65 :

  • Dry time 20-30 minutes
  • High adhesion so there will be no FOD (Flying Object Debris)
  • Can be applied at night
  • Can cope with high temperatures, tire scuffs resistant to tire friction with high pressure
  • Does not contain bio-accumulative metals, or chemicals; does not contain biocides
  • Environmentally Friendly, Harmless because it will not damage the ecosystem
  • After drying, it can be passed and road markings can be installed immediately.

Uses Danoes-65 :

  • Designed to be a flexible topcoat that will preserve the assets of parking lots, industrial floors, warehouses, roads, and bridges.
  • Very effective at covering small potholes if no water is added.

Application method :

  • Apply to a surface that is clean, free of ash, dry, and any contaminants, if there are traces of oil spillage, it must be cleaned immediately.
  • If the asphalt surface does not have deep potholes, aggregate, polymer and waterless emulsion can be used.

Physical Properties Danoes-65 :

Water absorption<1%ASTM D-570
Weight per gallon11,3 – 11,8 galonASTM D-1475
Percent Solid65 
Biocide ContentTIDAK ADA 
Wet Track Abrasion (6 Days)<30 gram / kaki persegi.ISSA A-105, T-100
VOC<10 gram/literBAAQMD Vol 3 Lab 22